|
|
 |
|
 大盈的複合金屬是以耐腐蝕金屬鈦、鋯包覆著銅，它同時具有兩種金屬的優點:耐腐蝕及高導電能力。將它運用在溶液中的導電匯流桿，完全改善傳統溶液上的導電匯流桿的缺點，並節省10%
~ 30%的能源消耗。
Spemet
supplies the metallurgical bonding clad materials: Titanium
clad Copper and Zirconium clad Copper. The clad materials have
both anti-corrosion and high current transfer capabilities.
Spemet utilizes TiCladCu and ZrCladCu to be the immersion bus
bars, which definitely improves the defectives of the conventional
bus bar and save 10%~30% energy in plating system. |
液中導電，效率高，降低電壓
Current-transfer
under solution result in low potential and high efficiency.
|
無銅綠產生，不用維修
Non-copper oxide, free maintenance.
|
長期使用，供電量穩定
Good
for long-term operation. Current supply is stable.
|
無銅綠掉入溶液，避免污染溶液
Non
fall-off of deposited impurities and copper oxide cause
the easy management solution.
|
導電效率高不生熱，排氣冷卻設備負擔輕
High
current transfer doesn’t cause heat generation to reduce
loading of ventilation and cooling systems.
|
無阻礙空間，添加陽極安全容易
Open
space makes the loading of anode easier and safer.
|
|
空氣中導電，電阻高，電壓高
Current-transfer
in the air result in high resistance and potential.
|
定期去除銅綠
To
clean copper oxide is necessary.
|
多次除銅綠後，銅尺寸變小，供電量減少
To
clean oxide will shorten copper size to decrease current
supply.
|
銅綠掉入溶液污染溶液，影響電鍍品質
The
solution will contaminated by the fall-off of deposited
impurities and copper oxide
|
電阻高易生熱，排氣冷卻設備負擔重
High
electrical resistance causes heat generation to make loading
of ventilation and cooling systems heavier.
|
阻礙添加陽極空間，造成不便
The
conventional bus bar interrupts the loading of anode.
|
|
材質：鈦包銅、鋯包銅、不銹鋼包銅
Material:
Titanium clad copper, Zirconium clad copper, and Stainless steel
clad copper.
規格：方形10mm x 50mm、12mm
x 50m， 圓形 25mm Dia, 31.8mm Dia。其他尺寸可訂製。
Specification:
Rectangular 10mm x 50mm, 12mm x 50mm
Round 25mm Diameter, 31.8mm Diameter.
The customer size under request.
|
|
Copyright
© 2000-2002 Spemet.Com All Rights Reserved.
大盈貿易有限公司
SPEMET CO., LTD.
公司 ：台北市中山北路二段162號8樓, Tel
: 886-2-2585-7681, Fax : 886-2-2585-9811
工廠 ：台北縣五股工業區五權八路30號, Tel
: 886-2-2290-0668, Fax : 886-2-2290-0667
Office
: 8F. No. 162, Sec 2, Chung Sang N. Rd, Taipei, Taiwan, R. O. C.
Facility : No.30, Wuchiuan 8th Rd., Wugu Shiang, Taipei Hsien, Taiwan,
R. O. C.
Email : spemet@ms9.hinet.net |
|
